Discount up to 35% for first purchase only this month.
$28.99
Your orders are shipped seamlessly between countries
All products have 60 days quality insurance
Your payments are secure with our private security network.
8 Core Waterproof Joint Connector Aviation Plug Watertight Connector for Underwater Robot ROV
Instructions for use
Male:
Option 1: (strongly recommended) After the cable is welded, the epoxy resin potting process is performed in the area shown in the figure below. It can effectively avoid the short circuit of water leakage caused by a broken cable.
Option 2: After the cable is welded, use this connector to seal with the sealing rubber sleeve (applicable wire diameter 6-8mm)
Female seat:
Option 1: Applicable to the case where the sheet is too thick, the female seat is fixed by the thread and the matching part, and the thread is added with a proper amount of thread locking rubber to avoid No thread loosening or encapsulation of epoxy resin at the thread
Option 2: The female seat and the mating parts are fixed by the nut with the joint, and the maximum thickness of the matching part is 4mm.
Precautions:
– The mother seat is fitted with a smooth surface for optimum waterproofing (eg acrylic, smooth stainless steel)
– When installing the base, make sure that the bottom seal completely enters the seal groove
– When installing the sealing rubber ring on the male cable, apply a proper amount of grease to the cable. The sealing rubber ring is evenly deformed to avoid water leakage.
1. Aluminum alloy material, surface oxidation treatment.
2. Multilayer seal design, effective waterproof depth of 200 meters.
3. Rated current 5A of each core, and it is a stable connection.
4. It is each for operation, and the size is 48.2mm x 20mm.
When matched with the plug, the female head can be sealed after the male head is pulled out.
Attention:
1. Only when the base is mounted on a smooth surface can it have the best waterproof effect (such as acrylic, smooth stainless steel, etc.)
2. When installing the mother seat, make sure that the bottom sealing ring has completely entered the sealing groove.
3. When the sealing ring is installed on the cable of the male head, an appropriate amount of grease can be applied on the cable, and even deformation of the sealing ring
can avoid leakage accidents.
1 x Aviation Plug
100% Original product that covered warranty by the vendor.
You have the right to return your orders within 30 days.
Your orders are shipped seamlessly between countries
Your payments are secure with our private security network.
ROVMAKER, who is trying to make a combination of underwater technology with scientific research and education practice……
jimmy@rovmaker.org
评价
目前还没有评价