Discount up to 35% for first purchase only this month.
$58.80
The module Boards provide a high-speed, long-distance Ethernet connection to an ROV or other remote platform. Designed for use with a twisted pair of wires or single wire. The module provides an Ethernet and a powerline port.
Your orders are shipped seamlessly between countries
All products have 60 days quality insurance
Your payments are secure with our private security network.
Product Description
Convenient for Wiring
Connect two or one wires between each module of L to L, N to N. It is unnecessary to be two-wire, only L/N to LN with one wire works fine. Also, it is not necessary to connect L and N wires with power. Even only cable no power also can communicate well. If you need a long-distance power supply, Power through L and N can deliver power and ethernet at the same time. Supply power for each board with a 12V input to the small terminal block. When connecting an Ethernet cable, the connection should become active immediately.
Widely Used
This module can be a part of the ROV electronics package and works well in conjunction with the Raspberry Pi, Pixhawk, and ArduSub control software , which brings convenience to long-distance power transmission and long-distance cable communication. It is a good choice for underwater robot cable communication.
Product Features
√ LONG COMMUNICATION DISTANCE – 300m+ tether length capability with twisted pair of wires
√ STABLE BANDWIDTH – Almost 100Mbps Ethernet over pair of a twisted or single wire
√ RICH COMPATIBILITY – Support HomePlug AV, IEEE802.3, IEEE802.3u, IEEE802.11g, IEEE802.11b, IEEE802.11n, support Mac, Linux, Windows
√ 8 NODE MAX – Support 8 node ethernet at the same power line
√ QUALCOMM CHIP – Use Qualcomm PLC chip, Stable and reliable scheme.
Technical Parameters
|
Supply Voltage
|
DC-12V-200mA
(min10-max13)
|
Max Practical Bandwidth
|
80 Mbps
|
|
Physical Layer Bandwidth
|
200 Mbps
|
Working Frequency
|
2 – 30 MHz
|
|
Tether Length
|
> 500 m
|
Operating Temperature
|
0°C to +70°C
|
|
Storage Temperature
|
-20°C to +70°C
|
Tether Wire Gauge
|
12 AWG – 30 AWG
|
|
Power Wire Gauge
|
16 AWG – 26 AWG
|
Dimensions
|
64 x 46 mm
|
|
Screw Hole Spacing
|
34 x 32 mm
|
Main Board Dimensions
|
38 x 38 x 15 mm (LxWxH)
|
|
Main Board Weight
|
20 g
|
Powerline Voltage
|
90v-240v (DC 360v tested)
|
|
Powerline Connection
|
One wire is recommended when through wires
|
Module Weight
|
27.5g
|
Product Uses
Packaging Delivery
Each Kit Contents
– Module with Main Board
Packaging
– Special Carton for International Logistics
Shipping
– We provide the above shipping method
100% Original product that covered warranty by the vendor.
You have the right to return your orders within 30 days.
Your orders are shipped seamlessly between countries
Your payments are secure with our private security network.
ROVMAKER, who is trying to make a combination of underwater technology with scientific research and education practice……
jimmy@rovmaker.org
评价
目前还没有评价